1/8 Scale Nitro On-Road Car MRX6X

>> MRX6X Picture <<
Mugen Seiki is proud to introduce the new MRX6X 1/8th nitro on-road kit.  The MRX6X is inspired and based off the products used by Mugen Seiki driver, Shoki Takahata, to capture the 2019 IFMAR 1:8 On-Road World Champion hosted by Steel City R/C Speedway.  The features of the MRX6X help improve steering, rear traction, drive train efficiency, and drivability.
Features of the new MRX6X kit (H2008) includes:
- New front suspension geometry.  The new front uprights and aluminum bearing holders
give you more overall steering and have a more precise steering feel.
The shape of the upper front arm also changed to accommodate the current bodies on the market.
- The new front shock tower and lower shock mounts have new geometry that increase
steering in the middle to the exit of the turn.
- New rear suspension geometry.  The new rear upper A-arms and rear upper arm plate
help improve rear traction.
- 0.8M pinion & spur gear.  The new 0.8M pinion and spur gear will increase drive train
efficiency.  You'll notice increased acceleration and increased runtime.
- New roll bar for easier refueling.  This will allow quicker pit stops.
- New front drive shaft.  The new front drives shafts allow increase steering angles and
more overall steering.
- The front wheel lever (H2231) and rear wheel lever (H2232) are standard equipment on
the MRX6X and allow easier installing/removing of wheels.
MRX6X New Parts:
H0272-B Front drive shaft
H02151-B Rear upper bulkhead
H2161L/R Front upright
H2162 Insert upright
H2163 Rear upper and lower arm
H2164 Rear upper arm plate
H2165L/R Front upper arm
H2166L/R Front lower shock mount
H2167 Roll over bar
H2233 Pinion 19T
H2234 Pinion 20T (Option)
H2235 Pinion 24T
H2236 Pinion 25T (Option)
H2237 Spur gear 60T (Option)
H2238 Spur gear 61T
H2239 Spur gear 62T (Option)
H2240 Spur gear 56T (Option)
H2241 Spur gear 57T
H2242 Spur gear 58T (Option)
H2422 Center Weight 30g (Option)
H2516 Front shock tower
Download:

♦ Parts List 1.83MB
♦ Kit bag details 384KB
 ♦ Screw chart 72.4KB
♦ Setup Sheet 2.78MB
♦ Instruction Manual 17.2MB
♦ Option parts
♦ Other optional parts  4.78MB
Other necessary equipment:
2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 21 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel  / Air Filter / Engine Starter / Body & Body paint tools / Fuel
Note:
The lead-detachable Servo from Sanwa cannot be used for the throttle/brake (can be used for the steering).
Require longer battery lead wire 150mm (Not include the connector).
You will find how to install Sanwa Built-in antenna receiver (RX-481, 482) to prevent any electrical interference. Click HERE for more information.
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

Copyright © 2020 Mugen Seiki Co., Ltd. All rights reserved.